|
IDEAL
FOR HEAVY DUTY MUNICIPAL & COMMERCIAL APPLICATIONS.
Designed for municipalities and contractors with a
minimum 34,000 lbs. GVW chassis.
GENERAL:
Self-contained hopper.
Spreads free flowing materials sand and/or salt.
Spread width of 4' to 40'.
MATERIAL HOPPER:
7-gauge 304 stainless steel cross members.
10-gauge 304 stainless steel, long sills with rear enclosure & integral chain shields.
10-gauge 304 stainless steel replaceable floor.
10-gauge 304 stainless steel sides (continuously welded seams), gussets and rear panel.
10-gauge 304 stainless steel front panel.
Four (4) 5/8" thick lift points.
FEEDGATE:
10-gauge, 304 stainless steel with scaled driver side screw jack adjustment.
18-5/8" wide x 10" tall opening.
CONVEYOR:
24" wide pintle chain conveyor with 3/8" thick x 1½" wide crossbars on 4½" centers (667X Pitch), 21,000 PSI/Strand.
2" diameter drive shaft with 4-bolt relubeable bearing.
8-tooth cast iron sprockets.
50:1 or 25:1 direct-drive gearbox with extended through-shaft for ground speed sensor.
1½" diameter idler shaft with 4" adjustable range relubeable bearing.
Conveyor chain wiper made of belted rubber minimizes waste.
STANDARD INSTALLED EQUIPMENT:
4-section hinged top grate screens. 3/8" diameter bar on 3" centers with ¼" x 2" x 2" angle iron frame.
Hinged to 6" horizontal crossbeam.
10-gauge, 304 stainless steel inverted "V" prevents material compaction and reduces wear on drive train components.
CHUTE/SPINNER ASSEMBLY:
10-gauge, 304 stainless steel laser cut parts with smooth radius corners.
4 telescopic adjustments in 3" increments to accommodate varying body mounting heights. 25.7" to 38.5" min/max adjustment below longsills.
Two (2) adjustable, internal baffles direct material to 20" diameter x 5/8" thick, 6-fin poly spinner disc.
Three (3) adjustable external and one (1) fixed deflector with overlapping corners provide a precision spread pattern.
Bottom-mounted, direct-drive hydraulic spinner motor provides exceptional spread pattern.
Two (2) stainless steel spring latches quick release hinged chute for bulk material unloading and convenient ground storage.
POWER SOURCE:
Hydraulic Drive: Two independent direct drive hydraulic motors (17 GPM @ 1,500 PSI).
OPTIONAL EQUIPMENT:
Dump Body Tailgate Latch Kit.
DOT Spreader Lightbar. 8" Tall x 66" Long x 3" Deep stainless steel lightbar includes 9 mounting holes for 4" recessed stop
turn-taillights-strobes and 2-1/2" marker lights.
Light bar kit includes: Wire Harness, (2) LED STT lights,
(2) LED Backup lights, (2) LED Strobe lights, (3) LED Marker lights, (2) LED Load Equalizers.
Buyers
Products Company reserves the right to change material,
dimension and/or component specifications without notice.
| Spreaders - 34,000 lb. to 38,000 lb. GVW chassis |
| Hopper Length: 144"; Overall Length: 167"; Width: 82" |
| Part
No. |
Drive |
Gearbox Ratio |
Cubic Yards
(level) |
Cubic Yards
(rounded) |
Side Height |
Weight |
| 1451057SSH |
Hydraulic |
50:1 |
8.76 |
10 |
57" |
2990 lbs. |
| 1421057SSH |
Hydraulic |
25:1 |
8.76 |
10 |
57" |
2990 lbs. |
| 1451163SSH |
Hydraulic |
50:1 |
10.28 |
11.82 |
63" |
3155 lbs. |
| 1421163SSH |
Hydraulic |
25:1 |
10.28 |
11.82 |
63" |
3155 lbs. |
| 1451369SSH |
Hydraulic |
50:1 |
11.82 |
13.59 |
69" |
3260 lbs. |
| 1421369SSH |
Hydraulic |
25:1 |
11.82 |
13.59 |
69" |
3260 lbs. |
| Spreaders - 48,000 lb. to 60,000 lb. GVW chassis |
| Hopper Length: 168"; Overall Length: 191"; Width: 82" |
| Part
No. |
Drive |
Gearbox Ratio |
Cubic Yards
(level) |
Cubic Yards
(rounded) |
Side Height |
Weight |
| 1451257SSH |
Hydraulic |
50:1 |
10.22 |
11.75 |
57" |
3570 lbs. |
| 1421257SSH |
Hydraulic |
25:1 |
10.22 |
11.75 |
57" |
3570 lbs. |
| 1451363SSH |
Hydraulic |
50:1 |
12 |
13.8 |
63" |
3930 lbs. |
| 1421363SSH |
Hydraulic |
25:1 |
12 |
13.8 |
63" |
3930 lbs. |
| 1451469SSH |
Hydraulic |
50:1 |
13.8 |
15.87 |
69" |
4040 lbs. |
| 1421469SSH |
Hydraulic |
25:1 |
13.8 |
15.87 |
69" |
4040 lbs. |
 |
