GENERAL:
• Self-contained hopper.
• Spreads free flowing materials sand and/or salt.
• Spread width of 4' to 40'.
MATERIAL HOPPER:
• 7-gauge 304 stainless steel cross members.
• 10-gauge 304 stainless steel, long sills with rear enclosure & integral chain shields.
• 10-gauge 304 stainless steel replaceable floor.
• 10-gauge 304 stainless steel sides (continuously welded seams), gussets and rear panel.
• 10-gauge 304 stainless steel front panel.
• Four (4) 5/8" thick lift points.
FEEDGATE:
• 10-gauge, 304 stainless steel with scaled driver side screw jack adjustment.
• 18-5/8" wide x 10" tall opening.
CONVEYOR:
• 24" wide pintle chain conveyor with 3/8" thick x 1½" wide crossbars on 4½" centers (667X Pitch), 21,000 PSI/Strand.
• 2" diameter drive shaft with 4-bolt relubeable bearing.
• 8-tooth cast iron sprockets.
• 50:1 or 25:1 direct-drive gearbox with extended through-shaft for ground speed sensor.
• 1½" diameter idler shaft with 4" adjustable range relubeable bearing.
• Conveyor chain wiper made of belted rubber minimizes waste.
STANDARD INSTALLED EQUIPMENT:
• 4-section hinged top grate screens. 3/8" diameter bar on 3" centers with ¼" x 2" x 2" angle iron frame.
• Hinged to 6" horizontal crossbeam.
• 10-gauge, 304 stainless steel inverted "V" prevents material compaction and reduces wear on drive train components.
CHUTE/SPINNER ASSEMBLY:
• 10-gauge, 304 stainless steel laser cut parts with smooth radius corners.
• 4 telescopic adjustments in 3" increments to accommodate varying body mounting heights. 25.7" to 38.5" min/max adjustment below longsills.
• Two (2) adjustable, internal baffles direct material to 20" diameter x 5/8" thick, 6-fin poly spinner disc.
• Three (3) adjustable external and one (1) fixed deflector with overlapping corners provide a precision spread pattern.
• Bottom-mounted, direct-drive hydraulic spinner motor provides exceptional spread pattern.
• Two (2) stainless steel spring latches quick release hinged chute for bulk material unloading and convenient ground storage.
POWER SOURCE:
• Hydraulic Drive: Two independent direct drive hydraulic motors (17 GPM @ 1,500 PSI).