IDEAL
FOR MEDIUM AND HEAVY DUTY COMMERCIAL APPLICATIONS.
General – All hopper spreaders are completely
self-contained, ultra-durable spreader
units designed
for ice and snow control. The rugged design allows for
use with salt, sand and other materials. The complete
assembly mounts easily on pickup, dump and platform trucks
making it ideal for municipalities, shopping malls, industries,
hospitals and private contractors.
POLYMER MATERIAL HOPPER – Rotationally molded
double-wall polymer unibody spreader with smooth angled
walls to maximize material flow. Features integrated positive
position mount system plus 4-piece ratchet tie-down kit.
No drilling required.
CONVEYOR – The conveyor is made of 12" wide
all-steel pintle chain with 3/16"x 3/4"cross
bars. Chain strength is 11,000 lbs.per strand;22,000 lbs.
total weight. The drive sprockets are 6-tooth cast iron,
on a 1-1/8" diameter shaft. The conveyor chain has
an adjustment range of 3-1/2". The drive shaft has
heavy-duty, sealed, self-aligning ball bearings with grease
fittings. The idler drum has heavy-duty 1" diameter
ball bearings.
CONVEYOR GEAR CASE – Gear is constructed of
aluminum bronze, worm gear is hardened steel and ground.
Housing is made of durable cast iron. Gear ratio is 20:1
with 1" input shaft and 1-1/8"output shaft on
tapered roller bearings.
FEEDGATE – Lever operated with a friction
lock for accurate adjustment.
SPINNER CHUTE ASSEMBLY –Feature high-quality
grade 304 stainless steel Spinner Chute Assembly, Deflectors
and Engine Hood. A polymer disc
with four fins is connected to a 3/4"diameter shaft
secured on two pillow block bearings. The spreading material
is guided from the conveyor to the spinner plate through
an enclosed chute with internal and external
deflectors. Adjustable deflectors allow for complete directional
spread control and full or compact spread. Total spread
radius ranges from 2' to 25'. The extra wide rear deflector
protects the rear and under carriage of the vehicle.
ENGINE – Heavy-duty 10.5 horsepower industrial/commercial
Briggs & Stratton gasoline engine. Engine comes equipped
with alternator and 12 volt electric starter with in-cab
start/stop and electric throttle control (standard). Entire
engine is completely protected by the convenient hinged
hood.
ELECTRIC THROTTLE CONTROL – Throttle control
unit allows for full-range of throttle settings,including
idle and full choke,via the in-cab hopper control box.
Use of electric throttle control eliminates cable freezing,
binding and breaking.
CLUTCH – 12 volt DC electric clutch has a
three-position in-cab switch, for greater control and
material economy. Also allows for low speed operation
and spot spreading.
96" Spreaders – Body Side Length, 8';
Overall Length, 113"; Capacity Struck, 1.8 cu.yd.;
Capacity Rounded, 2.1 cu.yd.; Width, 47"; Height,
32 –1/2"; Recommended Use, 3/4 or 1-Ton Trucks. |
